Original price
Rs. 38,500.00
-
Original price
Rs. 38,500.00
Original price
Rs. 38,500.00
Rs. 38,500.00
-
Rs. 38,500.00
Current price
Rs. 38,500.00
| /
The PCAN-LIN module enables CAN, LIN, and serial participants to communicate. The module is supplied in a plastic casing and includes firmware which enables data to be exchanged between the different bus systems. Various modes can be set up with the aid of configuration software. Then for instance the module acting as the LIN master can request data and route the incoming LIN data to the CAN bus and/or the serial interface. Data can be routed between CAN and LIN with an ID offset.
Technical Specifications
Pin assignment Female D-Sub Connector
2TxD (RS-232-level)3RxD (RS-232-level)5GND
Pin assignment Male D-Sub Connector
1VBat 9 - 30 V (Imax ~ 130 mA)2CAN-L3GND4LIN data6GND7CAN-H
General-purpose gateway (or router when using Acceptance Code / Acceptance Mask feature) from:RS-232 to LIN (and back)CAN to LIN (and back)RS-232 to CAN (limited bandwidth)
CAN bit rates up to 1 Mbit/s
Complies with CAN specifications 2.0 A/B
LIN bit rates of 1 to 20 kbit/s
Transmitting/receiving LIN 1.x and 2.x frames
Available for use as LIN master or slave
Simulation of LIN slaves. Data can be changed via CAN frames
Processing a user-definable LIN ID list (scheduler with limited number of entries)
Individual LIN frames can be initiated via CAN or RS-232
Voltage supply from 9 to 30 V
Extended operating temperature range from -40 to +85 °C (-40 to +185 °F)
Optionally available:
High-speed (ISO 11898-2) or Low-speed (ISO 11898-3) CAN transceiver module
Galvanic isolation between RS-232 and CAN/LIN up to 1 kV (only for High-speed CAN)
Scope of Supply
PCAN-LIN in plastic casing
Configuration and monitoring tool PCAN-LIN Config for Windows® 11 (x64/ARM64), 10 (x64)
Manual in PDF format
Downloads
More
Free returns on all eligible orders
Customers may request a return within 7 days of delivery if: